Final Assembly - Wolf TSW-120 Installation Instructions Manual

Decorative panel
TSW-120
White plastic plugs
Pipe cover
Pipe cover
14

Final assembly

For TSW-120 the following final steps must be completed:
Press the black plastic clips
decorative panel. Clip the decorative panel with the pre-assembled
plastic clips into the fixing holes of the DHW cylinder front panel.
Please note: Six black plastic clips are surplus and should be retained
as spare parts.
Decorative panel
On CSW-120 use the white plastic plugs supplied to close the four
holes in the front panel and the three holes in each of the l.h./r.h.
rear side panels. Please note: Two white plastic plugs are surplus
and should be retained as spare parts.
On TSW-120 use the white plastic plugs supplied to close the three
holes in each of the l.h./r.h. rear side panels.
After the installation, locate the pipe cover (accesory) on the DHW
cylinder ...SW-120 and push back.
(4 pieces) into the corners of the
Installation instructions DHW cylinders TSW-120/CSW-120
Black plastic clip
3048420_0707