Table of Contents
Advertisement
Guide the burner cable through the
aperture in the control unit bracket
(l.h. or r.h. subject to boiler door
opening).
Clip a cover cap into the control unit
bracket to protect the burner cable.
Secure the cable clip with the burner
cable at the l.h. or r.h. side (bottom)
of the boiler.
Position the casing cover
onto both side casings and push
towards the control unit bracket.
Push the front casing
with open control unit lid with the
profile screws against the spring
shackles
place.
Affix the type plate
in a clearly visible position.
Clip the Wolf logo
into the front casing
(only for FunctionLine).
3060918_1203
Boiler assembly
, until they click into
Cover cap
Cable clip
Burner cable holder
Front casing installation
Type plate
Type plate / Wolf logo
Wolf logo
15
Hide quick links:
Advertisement
Table of Contents
