Machine Screw (W/Washer) M5; Hex. Socket Hd. Bolt M4 - Hitachi NR 65AK Service Manual

(3) Disassembly and reassembly of the magazine section (See Fig. 35.)
[Tool required]
Hex. bar wrench (3 mm, 4 mm)
Spring [60]
Washer [61]
Nylon Nut M6 [65]
Magazine [74]
(a) Disassembly
Loosen the Hex. Socket Hd. Bolt (W/Flange) M4 x 6 [78] and remove the Handle Arm [66] and the Nail
Stopper [86].
Loosen the Machine Screw (W/Washer) M5 x 16 (Black) [70] and the Machine Screw (W/Washers) M5 x 25
(Black) [73A], remove the Magazine Cover [71] and the Nail Gate [72].
Loosen the seven Hex. Socket Hd. Bolts (W/Flange) M4 x 6 [78]. Now, the Magazine [74] and the nail feeder
ass'y and the internal components can be removed.
Shaft [59]
Nylon Nut M6 [65]
Handle Arm [66]
Hex. Socket Hd. Bolt
M6 x 12 [77]
Hex. Socket Hd. Bolt
(W/Flange) M4 x 6 [78]
Nail Feeder Ass'y
Fig. 35 Disassembly and reassembly of the magazine section
Magazine
Cover [71]
Machine Screw
(W/Washer)
M5 x 16
(Black) [70]
Nail Stopper [86]
--- 33 ---
Nail Gate [72]
Machine Screw
(W/Washers)
M5x25 [73A]
Nylon Nut M5 [87]
Flange Nut M5 [89]
Hex. Socket Hd. Bolt M6 x 12 [77]
Nail Rail [57]
Guide Plate [58]