New Mechanism - Hitachi NR 65AK Service Manual

8-2. New Mechanism

(1) Pushing lever mechanism
(a) The tip of Pushing Lever (A) [30] is at the back of
the nail point after loading nails in the Magazine
[74]. Thus, the nail point can be easily inserted
into the hole in the metal connector (Fig. 7).
(b) After inserting the nail point into the hole in the
metal connector, pull the Trigger [52] to make
the tip of Pushing Lever (A) [30] contact with
the surface of the metal connector. Then the
Trigger Arm [50] pushes up Plunger (A) [47]
and the nailer is started to drive nails (Fig. 8).
Pushing Lever (A)
[30]
Trigger
Arm [50]
Metal connector
Nail point
--- 10 ---
Trigger [52]
Magazine [74]
Nail point
Fig. 7
Plunger (A) [47]
Trigger [52]
Workpiece
The hole
Fig. 8