Specifications; Nail And Cap(Washer) Selection; Accessories; Standard Accessories - Hitachi NV50AP3 - 1-1 to Cap Nailer Instruction And Safety Manual

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Cap (Washer) capacity
Air consumption
Air inlet
NAIL AND CAP (WASHER) SELECTION
Only nails and caps (washers) shown in the Table below can be driven with this Nailer.
NOTE: Use only genuine Hitachi nails and caps (washers) to assure nail and cap (washer) quality and driving ease.
Nails
MIN. MAX.
.189" .189"
(4.8mm) (4.8mm)
.083"
(2.1mm)
.083"
(2.1mm)
Nails and caps (washers) are collated and coiled, as shown in the above figure.

ACCESSORIES

Accessories other than those shown below can lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

Caps (Washers)
Plastic caps (Washers) Steel caps (Washers)
Plastic-collated
WARNING
1
1 Safety glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
— 10 —
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-9/16" × 10-19/32" × 2-9/16"
(370 mm × 269 mm × 65 mm)
5.5 lbs (2.5 kg)
350 nails (1 coil)
350 caps (1 reel)
3
.046 ft /cycle at 100 psi
(1.3 ltr/cycle at 6.9 bar)
(1.3 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
Tape-collated
Reel of plastic caps
2 )
2
)
Wire-collated coil nails
Reel of steel caps
(Washers)
(Washers)