Hex. Socket Hd. Bolt M6; Hex. Socket Hd. Bolt M6 X 12; Hex. Socket Hd. Bolt M5 X 16 - Hitachi NR 65AK Service Manual

Mount the Nose [20] to the Body Ass'y [18]
inserting Pushing Lever (C) [24] into the hole of the
Pushing Lever Guide [54] (Fig. 30).
To mount the magazine section to the Nose [20],
insert the Magazine Ring [75] into the Magazine
[74] and sandwich it between the Nose [20] and
the Magazine Plate [76] then secure them with the
Hex. Socket Hd. Bolt M6 x 12 [77] (Fig. 31).
Insert the Sleeve [64] into the hole of the Guard
[23] and put Washer (B) [63] on the Sleeve [64]
then secure them with the Nylock Hex. Socket Hd.
Bolt M4 x 12 [62] (Fig. 31).
After reassembly, check that Pushing Lever (A) [30], Pushing Lever (B) [28] and Pushing Lever (C) [24] move
smoothly as shown in page 9, and also check that the nail feeder ass'y moves smoothly (Fig. 29).
Body Ass'y [18]
Hole of the Pushing
Lever Guide [54]
Guard [23]
Magazine section
Hex. Socket Hd. Bolt
M6 x 12 [77]
--- 30 ---
Pushing Lever
Guide [54]
Fig.30
Washer (B) [63]
Nylock Hex.
Socket Hd.
Bolt M4 x 12 [62]
Nose [20]
Magazine Ring [75]
Magazine Plate [76]
Fig.31
Sleeve [64]