Possible Malfunctions - Bartscher Contessa Duo 190.049 Instruction Manual

7. Possible Malfunctions

PROBLEM
The unit is turned on
but the control light
(brewing indicator) has
not come on.
Coffee machine is
turned on but does not
function.
The coffee machine
shuts off.
The unit is turned on,
the brewing indicator is
on, but hot water is not
flowing out.
The unit is turned on, the
brewing indicator does
not come on and hot
water does not flow out.
When turned on a fuse
immediately burns out.
The above problems only serve for orientation and as examples. Should these or
similar problems occur, turn the device off immediately and discontinue using it.
For having the device checked and repaired, contact qualified service personnel
or the dealer immediately.
CAUSE
•
Plug not connected
correctly
•
Fuse of mains opened
•
Control lamp defect
•
Switch defect
•
Coffee machine is
overdue a
decalcification
•
Overheating protection
was triggered.
•
Thermostat defect
•
Heating element defect
•
Thermostat defect
•
Control panel is
damaged
•
Damaged filling switch
•
Short-circuit
REMEDY
•
Connect plug correctly
•
Control fuse, test
machine on other plug
•
Contact supplier
•
Contact supplier
•
Pull plug and let coffee
machine cool off, press
RESET-button on the
back of the machine.
Decalcify machine.
•
Pull plug and let the
coffee machine cool
off. Press the RESET
button on the back of
the machine.
•
Contact supplier
•
Contact supplier
•
Contact supplier
•
Contact supplier
•
Contact supplier
•
Contact supplier
- 31 -