Setting Up And Testing Basic Wireless Connectivity - NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual

NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual

Setting Up and Testing Basic Wireless Connectivity

Note: If you use a wireless computer to change wireless settings, you may be
disconnected when you click Apply. Reconfigure your wireless adapter to match
the new settings or access the wireless router from a wired computer to make any
further changes.
Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. In the main menu of the WNR834B router, under the heading Setup, click Wireless Settings.
Figure 7-1
7-10
v2.1, July 2007
Troubleshooting