Viewing A List Of Attached Devices - NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual

Table 6-3 describes the router statistics.
Table 6-3. Router Statistics Items
Item Description
System Up Time The elapsed time since the router was last restarted.
Port The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen
displays:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time The time elapsed since this port acquired the link.
Poll Interval The intervals at which the statistics are updated in this window.
Set Interval To change the polling frequency, enter a time and click Set Interval.

Viewing a List of Attached Devices

The Attached Devices table contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table.
Figure 6-4
Using Network Monitoring Tools
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
v2.1, July 2007
6-5