Factory Default Settings; Managing The Configuration File; Backing Up And Restoring The Configuration - NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual

NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if
available), and the Ethernet MAC address. To force the router to look for attached devices,
click Refresh.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.

Managing the Configuration File

The configuration settings of the WNR834B are stored within the router in a configuration file.
You can back up (save) this file to your computer, restore it, or reset it to the factory
default settings.
From the main menu of the browser interface, under the Maintenance heading, select Backup
Settings.
Figure 6-5
The following sections describe the three available options.

Backing Up and Restoring the Configuration

The Restore and Backup options in the Settings Backup menu let you save and retrieve a file
containing your router's configuration settings.
6-6 Using Network Monitoring Tools
v2.1, July 2007