NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual page 80

NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
To set up Port Triggering:
1. In the main menu, under Advanced, Select Port Forwarding/Port Triggering.
2. Select the Port Triggering radio button. The Port Triggering screen appears.
Figure 5-3
3. Deselect the checkbox for Disable Port Triggering.
Note: If the Disable Port Triggering checkbox is selected after configuring port
triggering, port triggering is disabled. However, any port triggering configuration
information you added to the router is retained even though it will not be used.
4. For Port Triggering Timeout, enter a value up to 9999 minutes. This value controls the
inactivity timer for the designated inbound port(s). The inbound port(s) close when the
inactivity timer expires. This is required because the router cannot be sure when the
application has terminated.
5-10
v2.1, July 2007
Fine-Tuning Your Network