Setting The Time - NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual

If you select the Weekly, Daily or Hourly options and the log fills up before the specified
period, the log is automatically emailed to the specified email address. After the log is sent, the
log is cleared from the router's memory. If the router cannot email the log file, the log buffer
may fill up. In this case, the router overwrites the log and discards its contents.
4. Click Apply to save your settings.
So that the log entries are properly time-stamped and sent at the correct time, be sure to set the
time as described in the next section.

Setting the Time

The WNR834B router uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several Network Time Servers on the Internet. In order to localize the time for your
log entries, you must specify your Time Zone:
• Time Zone. Select your local time zone. This setting is used for the blocking schedule and for
time-stamping log entries.
• Automatically adjust for Daylight Savings Time. Select this checkbox if your region
supports daylight savings time. The router will automatically adjust the time at the start and
end of the Daylight Savings Time period.
Restricting Access From Your Network
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
v2.1, July 2007
3-9