Fanimation old havana series Owner's Manual page 6

How to Assemble Your Pedestal Accessory Fan
Tool Needed for Assembly
• ½ Adjustable Wrench
Unpacking Instructions for the Pedestal Accessory
WARNING
Do not install or use fan if any part is damaged or
missing. Contact your retail store for miss ing or
damaged parts.
WARNING
This product is designed to use only those parts
supplied with this product and/or any ac ces so ries
designated spe cifically for use with this product by
Fanimation. Sub sti tu tion of parts or accessories not
designated for use with this product by Fanimation
could result in personal injury or property damage.
NOTE: Column is not included and is sold seperately.
1. Remove base from carton.
2. Check to see that you have received the fol low ing
parts:
•
•
1. 5/16 -18 x 2½ Bolt
2. 5/16" Flat Washers (3)
3. Special Hex Bolt
4. 5/16 -18 x 1½ Bolt
NOTE: If you are uncertain of part de scrip tion, refer to
exploded view illustration. (page 19)
NOTE: Place the parts from the Hardware Bag in a
small container to keep them from getting lost. If any
parts are missing, contact your local retailer.
Upper Inner
Packaging
Lower Inner
Packaging
10
Hardware bag
Floor
Base
Carton
Fig. 17