Fanimation old havana series Owner's Manual page 16

Hide thumbs Also See for old havana series:

Table of Contents

Changing the Motor Assembly Position

These instructions apply to all four fan models.

1. Loosen 5/16-18 x 2½ bolt (Item #22) on Motor Assembly. Position Motor Assembly to

desired po si tion and retighten bolt (Fig. 27)

Fig. 27

2. The fans will not os cil late. To swivel the direction of the Mo tor As sem bly follow the

in struc tions be low.

3. Position fan grill to desired position by hand. Fan position is limited to 30° for ward tilt and

90° back ward tilt (Fig. 28). Loosen side bolts on Motor Assembly. Position Motor Assembly to

desired po si tion and retighten bolts.

30° Forward Tilt

90° Backward Tilt

Fig. 28

Table of Contents