Assembling Your Blender; Selecting The Speed - Oster 6800 Instruction Manual

INSTRUCTION FOR USE
1.
1. Turn Jar upside down so the small opening is at the top. Place Sealing Ring over Jar opening.
2. Place Blade into Jar.
3. Snap Threaded Bottom Disc and Collar together. Place Collar over Blade and Jar. (Note: If there
are slots on top of Collar, line them up with notches on Jar.) Place the Collar on Jar and turn the
z Threaded Bottom Disc clockwise to tighten.
4. Place Jar assembly onto base.
Push button ModEls
Slide switch to s High or t Low (if your model does not have a slide switch, push the
s High or t Low button.)
Push desired speed and blend ingredients to desired consistency.
iMPoRtant: Do not operate blender continuously for more than 3 minutes.
Push OFF button "O" to stop the Blender and turn Blender off.
To use PULSE, select s High or t Low. Push PULSE and hold down for desired length of time.
Release PULSE and allow Blade to stop. Repeat cycle as desired.
TIP: Refer to the "Guide For Processing Foods in Blender" located on page 5 for information
on processing foods.
dial ModEls Without tiMER
Turn Dial to desired food/ drink selection.
Press ON "I" and blend ingredients to desired consistency.
iMPoRtant: Do not operate blender continuously for more than 3 minutes.
Press OFF "O" to stop the Motor and turn Blender off.
Note: Food/ drink selection can be changed during blending by turning the Dial to the desired
selection.
Note: This Blender is programmed to turn the power off automatically if not used for a period of
several minutes.
To use PULSE, turn Dial to desired food/ drink selection. Press PULSE and hold down for
desired length of time. Release and allow Blade to stop. Repeat cycle as desired.

Assembling Your Blender

2.

Selecting The Speed

3.
English-3
4.
TIGHT