Assembling Your Blender - Oster 4123 Directions For Use Manual

ASSEMBLING YOUR BLENDER

Before you use the blender for the first time, separate the sealing ring, agitator
blade and container bottom. Wash in warm, soapy water. Rinse. Dry well.
Assembly
1. Turn container upside down.
2. Put sealing ring on opening.
Tighten the bottom
If you have trouble tightening the container
bottom by hand, follow steps 5-7. If not,
go to step 8.
5. Unplug the appliance.
6. Put container into base ring with handle
and lug as shown.
7. Turn container handle to the left to tighten
bottom. Lift container from the base.
Seat the container
8. When you are ready to blend, put foods
into the container in the amounts outlined
in this book.
9. Make sure the cover is on securely.
10. Seat container in base ring as shown in
10a. If container does not seat firmly in
that position, seat it as shown in 10b.
Now the blender is ready to use.
3. Turn agitator blades upside down
and place in container opening.
4. Screw container bottom firmly to
container.
8
10a
10b