Assembling Your Blender; Tightening The Container - Oster BEEHIVE OPB6000 Instruction/Recipe Booklet

ASSEMBLING YOUR BLENDER

CAUTION: Follow these important steps to assemble, tighten and mount Blender
container quickly and correctly. INJURY MAY RESULT IF MOVING BLADES
ARE EXPOSED.
1. Turn container upside down so the
small opening is at the top.

TIGHTENING THE CONTAINER

L
eft
S
top
1.
A B
R
ight
S
top
C
ontaineR
L
ug
M
otoR
B
aSe
C D
2.
2. Place Threaded Bottom Cap on Jar
and turn it clockwise to tighten.
3. Place Jar assembly onto base.
A. To tighten container bottom, put
assembled container securely into motor
base ring with handle and lug in front of
the right stop.
B. Using the container handle, turn
container to the left as far as possible.
This insures that the container bottom
is tightened properly. Remove container
from motor base and mount.
C. To operate Blender, place assembled
container in motor base ring with
container lug against flat side of the
motor base stop. If container lug
does not rest against flat side of right
stop, remove container assembly
and place against flat side of left stop.
Seat container firmly and operate.
D. To remove container, lift straight up.
(If it is not easily removed, rock gently
and lift up, do not twist). If container
bottom cannot be loosened by hand,
place assembled container into motor
base ring with handle in front of left side
stop. Using handle, turn container to
right until container bottom loosens.
Do not attempt to place the container on or
attempt to remove it from the motor base
while the motor is running.
ALWAYS HOLD CONTAINER WITH ONE
HAND WHILE PROCESSING!
4
3.