Configuring Macos X For Tcp/Ip Networking - NETGEAR DM602 Reference Manual

The TCP/IP Control Panel opens:
From the "Connect via" box, select your Macintosh's Ethernet interface.
2.
From the "Configure" box, select Using DHCP Server.
3.
You can leave the DHCP Client ID box empty.
Close the TCP/IP Control Panel.
4.
Repeat this for each Macintosh on your network.
5.

Configuring MacOS X for TCP/IP Networking

From the Apple menu, choose System Preferences, then Network.
1.
If not already selected, select Built-in Ethernet in the Configure list.
2.
If not already selected, Select Using DHCP in the TCP/IP tab.
3.
Click Save.
4.
Preparing Your Computer
Reference Manual for the Model DM602 ADSL Modem
3-7