Access Requirement; Connecting The Modem; Connecting To Your Adsl Service And Telephone Provider - NETGEAR DM602 Reference Manual

Access Requirement

The Model DM602 ADSL Modem contains a built-in ADSL modem, which connects directly to
an ADSL service provider.

Connecting the Modem

Before using your modem, you need to do the following:
• Connect your Ethernet or USB cable from the computer to the modem (see
• Connect the line from your ADSL service provider to the ADSL port of the modem (see
2-5).
• Connect the power adapter (see
A typical installation is shown in
Figure 2-4. Typical installation

Connecting to Your ADSL Service and Telephone Provider

The ADSL and telephone connections may vary by region.
Setting Up the Hardware
Reference Manual for the Model DM602 ADSL Modem
page 2-7).
Figure 2-4, below
Line
DM602 ADSL Modem
page 2-8).
page
2-5