Step 9: Ink Filling - Roland Texart XT-640 Setup Manual

w
x


Step 9: Ink Filling

1.
Select the ink type.

Ink type
SUBLIMATION3 4C
SUBLIMATION3 8C

Press .
w
x

When the screen on the left is displayed, select the desired
language, and then press
Press or
unit, and then press
Select the desired temperature unit in the same way, and
then press .
Press or
Cyan, magenta, yellow, and black
Cyan, magenta, yellow, black, light cyan, light magenta, orange,
violet
Press or
.
Selecting [NO] and pressing

from step .
Make sure the drain bottle is installed, and then press
.
When the screen on the left is displayed, remove the
right cover.
Press the part in the following figure until it clicks. Lightly pull the
cover in the direction indicated with
by raising it in the direction indicated by
4. Assembly and Ink Filling
.
to select the desired length
.
to select the ink type.
Colors used
to select [YES], and then press
will start the procedure over
, and then remove the cover
.
29