Set The Subnet Mask - Roland Texart XT-640 Setup Manual

5. Network Settings

2.

Set the subnet mask.





 
Repeat


Press
If you are using the computer and the machine on a one-to-one basis, this completes the settings to
configure on the printer. Go to Step 3.
If you need to set the gateway address, proceed to the following procedure.
3.
Set the gateway address.



38
When you have finished making the setting, press
Press
The screen returns to the screen in the figure.
Press
Press
Press
[SUBNET MASK]: 255.255.255.000
For the subnet mask, make the setting the same value as the one
used by the computer. Here, "255.255.255.000" is entered by way of
example.
Press

and to set the subnet mask.
When you have finished making the setting, press
Press
to go back to the original screen.
From the screen displayed in
twice.
Press
Press
[GATEWAY ADDR.]: 255.255.255.255
For the value to enter for the gateway address, consult your network
administrator. Here, "255.255.255.255" is entered by way of example.
.
.
.
twice.
to select the address number.
.
.
.
twice.
to select the address number.
1.

- , press