User Programs - Sharp AR-162 Service Manual

[8] USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
1. List of user programs
This copier has the following user programs.
Program
Program name
No
Auto clear time 1
Preheat mode 2
Auto power shut-
3
off timer
Stream feeding
4
mode*
Auto power shut-
5
off setting
Border line for 2
6
in 1 or 4 in 1*
Rotation copy* 7
Auto paper
8
select mode
Auto tray
9
switching
Auditing mode 10
Account number
11
entry
Account number
12
change
Account number
13
deletion
Number of
copies per 14
account
Resetting account 15
Erase width
16
adjustment*
Description
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
Sets the time that elapses before the copier enters the preheat
mode after any operation is made.
Sets the time that elapses before the copier enters the auto
power shut-off mode after any operation is made.
Enables or disables the stream feeding mode when an optional
SPF or RSPF is installed.
Enables or disables the auto power shut-off mode.
Enables or disables the border line which is printed in 2 in 1 or 4
in 1 copying when an electronic sorting kit and an SPF or RSPF
are installed.
Enables or disables rotation of original images.
Enables or disables the auto paper selection.
Enables or disables the automatic tray switching which occurs
when paper in a tray runs out. (This switching cannot switch to
the bypass tray.)
Enables or disables the auditing mode, which controls access to
copier.
Registers accounts for auditing mode.
Changes account numbers for auditing mode.
Deletes accounts for auditing mode.
Displays the total number of copies made against account
numbers.
Resets all audit accounts or resets any desired individual account.
Sets the amount of the edge erase and center erase areas.
AR-162 USER PROGRAMS – 1
Default Parameters
0(OFF)
1(30sec)
2(60sec)
60sec
3(90sec)
4(120sec)
5(10sec)
0(OFF)
1(30sec)
90sec
2(60sec)
3(90sec)
4(120sec)
1(30min)
2(60min)
30min
3(90min)
4(120min)
5(240min)
0(OFF)
OFF
1(ON)
0(OFF)
ON
1(ON)
0(OFF)
OFF
1(ON)
0(OFF)
ON
1(ON)
0(OFF)
ON
1(ON)
0(OFF)
ON
1(ON)
0 (OFF)
OFF
1 (ON)
– –
– –
– –
– –
– –
0(0mm[0"])
1(5mm[1/4"])
10mm[1/2"]
2(10mm[1/2"])
3(15mm[3/4"])
4(20mm[1"])