User Programs - Sharp AR-5520 Service Manual

[8] USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
1. List of user programs
This copier has the following user programs.
Program
Program name
No
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode* 1
Auto power shut-off
setting
Border line for
2 IN 1 / 4 IN 1* 2
2
Rotation copy*
Auto paper select mode* 3
3
Auto tray switching*
Auditing mode
10
Account number entry
11
Account number change 12
*1 On models with a SPF/RSPF.
*2 Setting cannot be made for the AR-5516S/AR-5520S (models which are not provided with e-sort). Though set to ON, it is disabled.
*3 Valid only for the tray 1 of the AR-5516/AR-5520/AR-5516D/AR-5520D.
"Auto clear time" automatically returns the copy settings to the initial
settings when a certain period of time elapses after a copy is made.
This program is used to select the period of time. "Auto clear time"
1 can also be disabled.
This function automatically switches the machine to a low power
consumption state if the set duration of time elapses without the
machine being used when the power is on.
The POWER SAVE indicator lights up, however, the keys on the
2
operation panel can be used. Normal operation automatically
resumes when a key on the operation panel is pressed, an original
is placed, a print job is received, or scanning is begun from a
computer.
This function automatically switches the machine to a state that
consumes even less power than preheat mode if the set duration of
time elapses without the machine being used when the power is on.
All lights except the POWER SAVE indicator and ON LINE indicator
3
go off. To resume normal operation, press the [START] key (
Normal operation also resumes automatically when a print job is
received or scanning is begun from a computer. While in auto power
shut-off mode, no keys (except the [START] key (
When copying using the SPF/RSPF, during the period of time that
the SPF/RSPF indicator blinks after an original has been scanned
4
(about 5 seconds), a subsequent original can be placed and
automatically fed into the machine.
Use this setting to enable or disable auto power shut-off.
5
When copying multiple originals onto a single sheet of paper (2 IN 1
/ 4 IN 1 copy), this function can be used to print a solid or broken
6
borderline around each original image.
When the auto paper select function is enabled and there is no
paper that is the same size as the original and loaded in the same
orientation, this function will automatically select paper of the same
size that is loaded in the opposite orientation, and rotate the image
7 90 degrees so that it is copied on the paper in the correct
orientation.
When the auto ratio select function is operating and the original and
paper are loaded in opposite orientations, this function rotates the
image so that it is copied on the paper in the correct orientation.
This function automatically selects paper that is the same size as
the original placed in the SPF/RSPF, or the same size as that
8 selected with the [ORIGINAL] key (only for sizes 5-1/2" x 8-1/2", 8-1/
2" x 11", 8-1/2" x 11"R, 8-1/2" x 14" and 11" x 14"). The function can
be disabled.
If the paper runs out during printing and there is paper of the same
size and orientation in another tray, this function automatically
9
switches to that tray (excluding the bypass tray). The function can be
disabled.
Use to enable or disable "Auditing mode".
"Auditing mode" is initially disabled.
Use to set up account numbers. Up to 20 accounts can be
established.
Use to change an account number.
AR-5520 USER PROGRAMS 8-1
Description
)) can be used.
Default Parameters
1 (OFF)
2 (10sec)
3 (20sec)
60sec
4 (60sec)
5 (90sec)
6 (120sec)
1 (1min)
2 (5min)
3 (30min)
1min
4 (60min)
5 (120min)
6 (240min)
1 (5min)
2 (30min)
3 (60min)
5min
4 (120min)
).
5 (240min)
0 (OFF)
1 (ON)
OFF
0 (OFF)
ON
1 (ON)
1 (OFF)
OFF 2 (Solid line)
3 (Broken line)
0 (OFF)
1 (ON)
ON
0 (OFF)
1 (ON)
ON
0 (OFF)
1 (ON)
ON
0(OFF)
OFF
1(ON)
None
-
- None