Removal And Storage Of Fixing Screw - Sharp AR-162 Service Manual

6) Attach the developer tank to the developer cartridge.
* After supplying developer into the developer cartridge, do not
tilt or shake the developer cartridge.
7) Attach the developer cartridge to the copier, and fix it with the
screw.
B. Toner cartridge installation
1) Shake the toner cartridge several times horizontally, and remove
the tape.
* Do not hold the shutter lever when shaking.
* After removing the tape, do not tilt or shake the toner cartridge.
4 or 5 times
Shutter
2) Attach the toner cartridge to the copier.
3) Pull the shutter lever.
Close the front cover A, then close the side cover B.
•
When closing the front cover, gently press the both sides.
•
When closing the side cover, hold the knob.
•
When closing the covers, be sure to close the front cover first,
then close the side cover. If closed in a wrong sequence, the
covers may be broken.
A
Tape
B
AR-162 UNPACKING AND INSTALLATION – 2

4. Removal and storage of fixing screw

1) Lift the knob and gently pull out the tray.
2) Hold the paper pressure plate and turn the fixing screw in the
arrow direction.
3) Store the fixing pin and the fixing screw in the tray.
•
Store the fixing screw which was removed in the above proce-
dure 2 and the fixing screw which was removed in procedure 2
of 2.
•
Removal of protective material and fixing screw in the storage
place in the tray.
Pressure
plate
lock
Screw