Fein BLS1.6X Instruction Manual page 15

3 41 01 105 06 0.book Seite 15 Freitag, 23. November 2007 11:24 11
Instruction manual for sheet metal shear.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø Diameter of a round part
Max. work-piece thickness for steel with up to 400 N/mm
Fe 400
Max. work-piece thickness for steel with up to 600 N/mm
Fe 600
Max. work-piece thickness for steel with up to 800 N/mm
Fe 800
Max. work-piece thickness for aluminium with up 250 N/mm
Al 250
Min. inside curve radius
r
Weight according to EPTA-Procedure 01/2003
low stroke
medium stroke
high stroke
Character Unit of measure,
international
n /min
0
n m/min
S
P W
1
P W
2
M... mm
L dB
wA
L dB
pA
K...
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
/min, m/s
Unit of measure,
national
spm
m/min
W
W
mm
dB
dB
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2 2
rpm, m/s
2
2
2
2
Explanation
Stroke rate at no-load
Cutting speed
Power input
Output
Size of metric thread
Sound power level
Sound pressure level
Uncertainty
Acceleration
Basic and derived units of measure from the inter-
national system of units SI.
EN
15