Sony NSR-1000 Series Installation Manual page 28

If the router supports the UPnP function, you can
use the UPnP function to configure the router
settings.
• This setting allows all of the setting items will be
configured automatically via UPnP. If you want
to specify port numbers manually, refer to the
User's Guide (PDF).
• Router configuration is not necessary if the UPnP
function is used.
If you are not using a broadband router with UPnP
support, or if you are not using the UPnP function,
click [Server Configuration] in the [Administration
Menu], click [NAT Setting], and then configure the
settings in the [NAT Setting] dialog box that
appears. For details, refer to the User's Guide
(PDF).
These settings are not required if you do not intend
to access the system from an external network.
Select [Skip configuration] and click [Next], and
proceed to step 7 in such cases.
1 Select [Configure].
2 Click [Send request to router].
3 Click [Next].
Caution
• To ensure Internet (WAN side) security, be
sure to use the firewall function on your
router or similar device, and confirm that the
security for the configured port is enabled.
• If security is not enabled via the router or
similar device, there is a risk of the NSR
being accessed by unauthorized users via the
28
Step 3: Settings
WAN side ports. To maintain security,
change the password regularly and configure
other related settings.
changing the password, refer to the User's
Guide (PDF).
• If unauthorized users log onto the NSR, there
is a risk of the following.
- The NSR settings may be changed.
- Images from cameras and recorded images
may be viewed and operated.
• Depending on your router and operating
environment, connection from an external
network may be disabled.
1) For details on router security settings, refer to the operating
instructions for the routers, or contact the manufacturer of
each router.
2) Changing the password does not guarantee prevention of
log on by unauthorized users.
3) Sony Corporation is not liable for any loss of profits
incurred by the customer as a result of such occurrences.
The customer is responsible for configuring appropriate
settings and measures.
The Complete screen appears.
7
Click [OK].
This completes Easy Setup.
Proceed to "Configuring automatic record settings"
(page 31).
Selecting automatically detected
cameras and registering them
simultaneously
Automatically detect devices on the same segment of the
network as the NSR, select the cameras to register, and
then register them simultaneously.
You can also configure the IP addresses and port
numbers of the cameras during registration. Entering the
administrator ID and password of cameras enables you
to register the devices.
1
Select [Advanced Setup], and click [Next].
1)
The Configuration window appears.
2)
For details on
3)