ABB M22311 series Manual page 8

ABB-Welcome
5B In standby mode, hold the button to mute ringtone of all indoor stations
5C When a call is coming, press this button to reject the call.
5D During the conversation, press this button to mute microphone.
The LED illuminates to indicate mute status.
6 Programmable button 1
6A Release the lock connected with an outdoor station (COM-NC-NO)
6B In standby mode, hold this button for 3 seconds to send SOS alarm to
6C *Programmable button for additional functions, e.g. call to guard unit,
7 System setting button
Enter the system setting menu for various functions of the device.
If the LED flashes rapidly, it means that setting is busy.
8 **Induction loop function
* For use of those buttons, please contact your electrical installer.
** The function is only available in M22313-.
Pos : 22 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ür all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
|
in the apartment.
(default function).
the guard unit. If LED flashes slowy, it means success; and if flashes
rapidly, it means failure.
intercom.....
Operations
— 8 —