Preparation; Connections - Panasonic KX-TG1311AL Operating Instructions Manual

TG1311_1312_1313E(e).book Page 6 Wednesday, June 4, 2008 4:10 PM

Preparation

Preparation

Connections

Base unit
The base unit can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV207AL.
L Use only the supplied telephone line cord. Using another telephone line
cord may not allow the unit to work properly.
30 mm
Screws
(Not supplied)
6
Charger
Available for:
KX-TG1312/KX-TG1313
The charger can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV209AL.
(220–240 V AC, 50/60 Hz)
Hooks
Note:
(220–240 V AC, 50/60 Hz)
L Never install telephone wiring during a lightning storm.
L Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
L The unit is not designed to be used with rotary/pulse dialling services.
To telephone line
During a power failure
The unit will not work during a power failure. We recommend connecting a
corded-type telephone (without AC adaptor) to the same telephone line or
to the same telephone line
25.2 mm
Hooks
Screws
(Not supplied)
socket using a telephone double adaptor.