Useful Information - Panasonic KX-TG1311AL Operating Instructions Manual

TG1311_1312_1313E(e).book Page 19 Wednesday, June 4, 2008 4:10 PM
Transferring calls, conference calls
Available for:
KX-TG1312/KX-TG1313
Outside calls can be transferred between 2 handsets. 2 handsets can have
a conference call with an outside party.
Example: When handset 1 transfers a call to handset 2
1
Handset 1:
During an outside call, press {INT} i Press {2} (desired handset
number).
L The outside call is put on hold.
L If there is no answer, press {INT} to return to the outside call.
2
Handset 2:
Press {C} to answer the page.
L Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press {ih}.
To establish a conference call, press {3}.
Transferring a call without speaking to the other handset user
1
During an outside call, press {INT}. i Enter the desired handset
number.
L k flashes to indicate the outside call is on hold.
2
{ih}
L The outside call rings at the other handset.
Note:
L If the other handset user does not answer the call within 30 seconds, the
call rings at your handset again.

Useful Information

Troubleshooting
If you still have difficulties after following the instructions in this section,
disconnect the base unit's AC adaptor and turn off the handset, then
reconnect the base unit's AC adaptor and turn on the handset.
Problem Cause/solution
w is flashing. L The handset is too far from the base
unit. Move closer.
L The base unit's AC adaptor is not
connected. Check the connections
(page 6).
L You are using the handset or base unit
in an area with high electrical
interference. Re-position the base unit
and use the handset away from
sources of interference.
L The handset registration is cancelled.
Register the handset to the base unit
(page 21).
L The base unit's AC adaptor or
I cannot make or receive
telephone line cord is not connected.
calls.
Check the connections.
L The call bar feature is turned on. Turn it
off (page 14).
L You dialled a call restricted number
(page 16).
L The key lock feature is turned on. Turn
it off (page 11).
L The unit is not designed to be used with
rotary/pulse dialling services.
The unit does not ring. L The ringer volume is turned off. Adjust
the ringer volume (page 14).
Useful Information
19