Guide To Base Unit Settings - Panasonic KX-TG1311AL Operating Instructions Manual

TG1311_1312_1313E(e).book Page 16 Wednesday, June 4, 2008 4:10 PM
Useful Telephone Settings

Guide to base unit settings

To customise the base unit (general approach):
1
{j/OK}
2
Press {v} or {e} to select "SETTING BS". i {>}
L "INPUT CODE" is displayed.
3
Enter the desired code number. Follow the instructions in the "Feature"
column of the chart.
L To exit the operation, press {ih}.
Code No. Feature (default setting)
Reset base unit to its default settings.
{0}
− Enter base unit PIN (default: "0000").
Recall/flash time (100 ms)
{3}
− Enter base unit PIN (default: "0000").
i {1}
− Select the desired setting by pressing {1} for
700 ms, { 2 } for 100 ms
or {3} for 90 ms. i {>}
Change base unit PIN ("0000").
{5}
− Enter the current 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN again.
16
Code No.
{6}
*1
*2
i {>}
*3
*2
i {2}
*4
*2
{*}
*1 Only the emergency number setting is not reset.
*2 If you forget your PIN,
Feature (default setting)
*5
Call restriction
■ Setting call restriction
− Enter base unit PIN (default: "0000").
the desired handset numbers. i {>}
− Enter the phone number to be restricted (8 digits
max.).
L To select a different memory location, press {>}
and enter a number.
− {>}
■ Turning on/off call restriction
− Enter base unit PIN (default: "0000").
L Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
− Enter the desired handset numbers to turn on/off.
i {>} 2 times
*6
("000", "106")
Emergency number
− Enter base unit PIN (default: "0000").
■ Storing:
− Enter the emergency number (8 digits max.).
L To select a different memory location, press
{>} and enter a number.
− {>}
■ Editing:
Press {>} to display the desired number. i {C}
i Enter the new emergency number. i {>}
Date and time: page 10
contact your nearest Panasonic service centre.
*2
i Enter
*2
*2
i {*}