NEC PX-50XM4 series Service Manual page 369

G) MODEL NAME LABEL
Print out the model name, the POS code, weight, etc., on the model name label (29L05951).
Detailed contents shall conform to the diagram below. In regard to the size, character height,
line boldness, and font, refer to the model name label (61XM3G) (29L06491).
H) Adhesion of the MODEL NAME LABEL and BAR CODE SERIAL LABEL
Stick the model name labels (29L05951) to both right and left sides shown in the diagram below.
Stick the barcode serial label (16761791) to the right side plane shown in the diagram below.
Detailed Contents of Printing for the MODEL NAME LABEL
FRONT
[Horizontal Positioning for Label Adhesion]
Adjust the top and bottom markings of the label
to the edge lines of the carton box.
[Vertical Positioning for Label Adhesion]
Adjust the lower plane of the label to the
carton box line.
LEFT SIDE
FRONT
BAR CODE SERIAL LABEL
[Label Adhesion Positioning]
For vertical adjustment, the lower plane of
the label shall be adjusted to the upper plane
of the model name label. For horizontal
adjustment, the label shall be adjusted to
the guide of the model name label.
8-5
CONFIDENTIAL
PK01
BAR CODE SERIAL LABEL
16761791
RIGHT SIDE