NEC PX-50XM4 series Service Manual page 345

E) JOINT, PP BAND, STOPPER
To be locked by inserting the joints (24CS0551) in 4 positions.
Hang the P.P band based on the marking printed on the carton box
edge line and fasten it with a stopper (P.P band) (24282431).
Markings for the P.P band
PP BAND
PK03 JOINT
24CS0551
1. Insert the JOINT
in a carton box.
F) BAR CORD SERIAL LABEL
The required items shall be printed on the barcode serial label (16761791).
Detailed contents of printing shall conform to the diagram below.
Upper stage: Print abarcode with the same contents as those of the middle stage.
Middle stage: To be printed out in the order of asterisk, merchandise code (in 8 digits),
Lower stage: Print out Model No. "PX-50XM4A".
http://getMANUAL.com
CARTON BOX T
2. Rotate the hinged part.
JOINT Mounting Details
Detailed Contents of Printing for the BARCODE SERIAL LABEL
3 spaces, serial number (in 9 digits), and asterisk. The merchandise code
is "01272276". The serial number shall be the same as the one that is
printed on the serial label (24L44731) of the set main body.
PK02 STOPPER
24282431
Same workmanship on the
opposite side.
The tape to be used shall be
a transparent P.P tape
60mm*50m (92203187) or
a Colorian PP tape #426
60mm*50mm (9W050001).
CARTON BOX B
JOINT
3. Push it in until it is locked.
(Cross section)
8-4
CONFIDENTIAL