NEC PX-50XM4 series Service Manual page 318

7. FILTER
(Caution) No SHIELDING TAPE has been stuck to the service part FILTER. Therefore, in the case of filter replacement,
please order the SHIELDING TAPE and stick it as illustrated below. (CLASS A)
SHIELDING TAPE (CLASS A)
(Caution) Once the shielding tape is removed, it must not be used again because
(Caution) Once the shielding tape is removed, it must not be used again because
its adhesive strength has been reduced.
its adhesive strength has been reduced.
PX-50XM4 Series(Mitsui Chemicals filter)only
PX-50XM4 Series(Mitsui Chemicals filter)only
M05 SHIELDING TAPE AL(25*50M) 29C01911
M05 SHIELDING TAPE AL(25*50M) 29C01911
Shall be stuck to the four sides.
Shall be stuck to the four sides.
Spatter film Silver paste
FILTER
[Display side]
Black area
1120mm
M41
M41
PX-50XM4 Series: FILTER(50A) 29KS0151
PX-50XM4 Series: FILTER(50A) 29KS0151
PX-50XR4 Series: FILTER(50B) 29KS0161
PX-50XR4 Series: FILTER(50B) 29KS0161
* The filter is positioned at bottom left.
* The filter is positioned at bottom left.
Cross-section diagram
M05 SHIELDING TAPE AL(25MM*50M)
29C01911
7-9
CONFIDENTIAL