NEC PX-50XM4 series Service Manual page 517

CONFIDENTIAL
Operational descriptions

Main side
• The PC signal entered from the RGB2 is output from the out1 side through the Video/sync SW.
• The signal output from out1 is entered in the A/D1 where it is digitized.
• The digitized signal input is entered in the digital signal processing block, where various processing of scaling, γ correction, and others is carried out.
Sub side
• The PC signal entered from the RGB1 is output from the out2 side through the Video/sync SW.
• The signal output from out2 is entered in the A/D2 where it is digitized.
• The digitized signal input is entered in the digital signal processing block, where various processing of scaling, γ correction, and others is carried out.
Dual screen synthesis
• The signals processed in Main and Sub respectively are then synthesized in the digital signal processing block.
• After passing through these processes, the signal is entered in the LVDS transmitter and the LVDS signal is generated there. This signal is then applied to the
module.
14-59