NEC PX-50XM4 series Service Manual page 353

D) SPACER, PILLAR, CARTON BOX
PK06 SPACER TL(50XM3)
29MS2211
Positioned on the left as seen from
the front so that the usage arrow mark
face the front plane of the set.
PK16
ACCESSORY BOX(W)
29MS1641
PK12
PILLAR S(50XM4)
29MS3071
PK08 SPACER BL(50XM3)
29MS2231
Positioned on the left as seen from
the front so that the usage arrow mark
face the front plane of the set.
PK14 CARTON BOX B(50XM3)
29MS2382
REAR SIDE
PK13 PILLAR T(50XM3)
29MS2371
PK10
SPACER BC(50XM3)
29MS2251
PK15
SUPPORT BC(50XM3)
29MS2581
PROTECTION
SHEET
*Make sure not to damage
this portion when a spacer
is entered.
Rear Side
Fastened with a tape in 5 positions.
The ashesive tape to be used is:
Paper adhesive tape 30mm*18mm:
92203227 or Paper adhesive tape
19mm*18mm: 92203226
To be folded inside
(6 positions)
PK12 PILLAR S(50XM4)
29MS3071
Diagram of Pillar Assembly T
Fold it in the direction indicated by the arrow,
and join the notch parts.
8-3
CONFIDENTIAL
PK11 CARTON BOX T(50XM4)
29MS3131
The plane with the "front" indication
shall be made to coincide with the
monitor front.
PK07 SPACER TR(50XM3)
29MS2221
Positioned on the right as seen
from the front so that the usage
arrow mark face the front plane
of the set.
PK04
PROTECTION SHEET(50XM3)
29M00891
Wrap the set.
PK05
PROTECTION SHEET S(50XM3)
29M00901
Put it on 29M00891.
PK09 SPACER BR(50XM3)
29MS2241
Positioned on the right as seen
from the front so that the usage
arrow mark face the front plane
of the set.
Notch parts