Split Screen Operations; Showing A Couple Of Pictures On The Screen At The Same Time; Operations In The Side-By-Side Mode - NEC PX-50XM4 series Service Manual

SPLIT SCREEN Operations

Showing a couple of pictures on the
screen at the same time
* An RGB-input picture may not be displayed in these modes,
depending on the input signal specifications.
1. Press the button to select a screen mode from among single
mode, side-by-side, and picture-in-picture.
A
SINGLE
button
SIDE BY SIDE
button
SIDE BY SIDE
button
VIDEO1 RGB/PC1
A B
PICTURE IN
PICTURE
button
Note:
Picture A and B on the above screen are not always of the
same height.
Information
Split screen operations may not function depending on
the combination of input signals. In the table below,
" " means Yes, " " means No.
Pictures displayed on the right/main screen (Select1)
VIDEO1 VIDEO2 VIDEO3
Pictures
VIDEO1
displayed on VIDEO2
the left/sub VIDEO3
screen
HD/DVD1
(Select2)
HD/DVD2
RGB2
RGB/PC1
HD/DVD3
RGB3
SCART1~3
Split screen operations may not function
depending on the type of the RGB signals.
VIDEO1
SINGLE
button
PICTURE IN PICTURE
button
VIDEO1 RGB/PC1
Main screen
Sub
screen
HD/DVD1 HD/DVD2 RGB/PC1 HD/DVD3 SCART1~3
RGB2 RGB3
1,2:
3:
1,2:
3:
1,2: 1,2:
3: 3:

Operations in the Side-by-side mode

To change the picture size, press the cursor
button.
button
VIDEO1 RGB/PC2
B
A
button
Side-by-Side2-R
button button button
button
VIDEO1 RGB/PC2
B
A
button
Side-by-Side4-R
To swap the picture on the right and the left, press the
cursor button.
VIDEO1
A
RGB/PC1
B
To make the desired picture active, press the ACTIVE
SELECT button.
VIDEO1
A
VIDEO1
A
E-12
4-16
CONFIDENTIAL
button
VIDEO1 RGB/PC2 VIDEO1
A
A B
button
Side-by-Side1 Side-by-Side2-L
button button
button
VIDEO1 RGB/PC2 VIDEO1
A
A B
button
Side-by-Side3 Side-by-Side4-L
RGB/PC1
B
button
VIDEO1
A
RGB/PC1
B
ACTIVE SELECT
button
RGB/PC1
B
or
RGB/PC2
B
button
RGB/PC2
B