11. Set the console assembly on the Left and Right
Uprights (82, 83). Be careful not to pinch any
wires. Insert the excess wire into the Right
Upright.
Start two 5/16" x 3/4" Patch Bolts (5) with two
5/16" Star Washers (9) into the Right Upright
(83). Then start a 5/16" x 1 1/2" Patch Bolt (4)
into the Right Upright. Repeat this step on the
left side of the treadmill. Then, firmly tighten
all six Patch Bolts.
12. See steps 5 and 6. Tighten all the Bolts used in
these steps.
Attach the Left Accessory Tray (101) and the
Right Accessory Tray (104) to the console as-
sembly with eight #8 x 1/2" Screws (1).
11
4
9
83
12
104
1
1
12
Console
Assembly
5
5
82
Console
Assembly
101
1
1
4
9