Connection To External Equipment - NEC NLT-32HDB3 Owner's Manual

Connection to External equipment

- You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please
check with your manufacturers instruction books for specific information. Make sure all connections
are made with both your set and additional appliance unplugged from the mains to avoid damaging
your equipment.
- Here shown may be somewhat different from your set.
Connect to Aerial socket
< Back panel of the set >
VCR
Watching VCR
Y Pb Pr
COMPONENT IN
< Back panel of VCR >
Use the INPUT button on the remote control to select
Insert a video tape into the VCR and press the PLAY button on the VCR.
(See VCR owner's manual).
Connect the RF out socket of the VCR to the aerial sock-
et on the back of the set.
Connect the aerial cable to the RF aerial in socket of the
Air
VCR.
Store the VCR channel on a desired programme number
using the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
< Back panel of the set >
S-VIDEO IN
RS-232
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
- If you connect an S-VIDEO VCR to the S-
VIDEO input, the picture quality is improved;
compared to connecting a regular VCR to the
Video input.
- To avoid picture noise (interference), leave
an adequate distance between the VCR and
set.
, or .
AV1 AV2 S-Video
11