Place The Display On A Solid Surface; Antenna Connection - NEC E463 User Manual

Place The Display On A Solid Surface

Ensure that the LCD display is placed
in a position to allow free flow of air. Do
not cover the ventilation openings on
the back cover� Do not place the display
near any open flames. Do not allow the
display to be placed in an environment
where it can be exposed to heat, direct
sunlight, or rain and water� Do not
expose the equipment to any liquid�

Antenna Connection

Unless your LCD display is
connected to a cable TV system or
to a centralized antenna system, a
good outdoor color TV antenna is
recommended for best television
performance� However, if you are
located in an exceptionally good signal
area that is free from interference
and multiple image ghosts, an indoor
antenna may be sufficient.
When using a 75-Ohm coaxial cable system, connect the CATV coaxial cable to the
AIR/CABLE (75-Ohm) terminal� Or if you have an antenna, connect the coaxial cable to
the same AIR/CABLE terminal�
English-13
Min
1 m