Connecting To An External Av Signal Source(Hdmi); Connecting To An External Av Signal Source(Av Output) - Teac LCDV2655HD User Manual

System Connections
Connecting to an External AV Signal Source (HDMI)
Follow the figure below to connect an HDMI signal source to one of the HDMI jacks on the rear
panel of the unit.
After connection, turn on the power of the unit and the external AV signal source. Press INPUT then
direction buttons to select HDMI 1 or HDMI 2 mode, and then press the ENTER button to confirm.
HDMI provides both audio and video signals and typically provides superior image
quality to component, S-Video or composite.
Connecting to an External Signal Source (AV Output)
Use the AV cables to connect the external AV input device to the AV output jacks on the rear panel
of the unit.
After connection, turn on the power of the unit and the external AV signal source. Press INPUT then
direction buttons to select the corresponding mode, and then press the ENTER button to confirm.
- - 15