Fm Radio; Clock Functions - AEG IR 4430 Instruction Manual

fM Radio

Clock functions

Tune stations
‹
Use the control knob "SCROLL/ENTER" (3) to select the menu item
"FM", turning on FM reception.
‹
Press either "BROWSE/TUNE DOWN" (10) or "TUNE UP/
button. The device will automatically search for the next radio
station with sufficient signal strength within the frequency range.
Frequency and name of the tuned station will be displayed.
You may also tune the receiver frequency manually using the control
knob "SCROLL/ENTER" (3).
Store stations
You can assign fixed storage places in the device to up to 10 stations.
Thus, you avoid the effort of searching the stations each time again.
‹
With the station set, press the "
1" will be displayed. Use the "
(12) to select the desired storage place from 1 – 10, and assign it to
this station by pressing the control knob "SCROLL/ENTER" (3).
Stored stations can be accessed using the "
buttons (12). Press the control knob "SCROLL/ENTER" (3) to listen to the
desired station.
Set time/date
NOTE
 When operating in a network, the IR 4430 will obtain time
and date from the web. Setting the time/date will then not be
required.
‹ Use the control knob "SCROLL/ ENTER" (3) to select the item "Se-
tings" from the main menu, followed by "Set time/date". Use the
control knob "SCROLL/ENTER" (3) to set the hour and press the
knob to confirm. Adjust minutes, day, month and year successively
in the same way.
Alarm functions
Set alarm times
‹
Select the item "Alarm Clock" followed by "Set alarms" from the
main menu, using the control knob "SCROLL/ ENTER" (3).
The device allows you to set five different alarm times.
‹
Select one of the five alarm times using the control knob "SCROLL/
ENTER" (3).
‹
Set the alarm time using the control knob "SCROLL/ENTER" (3).
English
49
" (11)
/MEM" button (13). "Set Preset
SKIP/PRESET " buttons
SKIP/PRESET "