Table of Contents
Advertisement
Appendix C
Cabling Guidelines
This appendix provides information on the cable specifications and guidelines for Category 5
UTP cabling used with the NETGEAR Model SW108 Ethernet switch.
Ethernet Technology
When 10BASE-T technology was originally introduced, multiple repeaters were frequently used
to build large networks. To increase the number of connections, repeaters were connected together
because individual repeater port densities were often limited to 8 to 24 ports. As structured wiring
systems were implemented, horizontal wiring from the wiring closet to the desktop was designed
for a maximum distance of 100 meters. Stackable repeaters eliminated the need for collision
domains to extend over multiple repeater hubs.
Cable Specifications
For 10 Mbps connections, Category 3, 4, or 5 cable can be used; however, NETGEAR highly
recommends Category 5 cable. Category 5 cable will prevent unnecessary expense or confusion
if you upgrade to Fast Ethernet.
Cabling Guidelines
C-1
Advertisement
Table of Contents
