Segment Switching - NETGEAR ETHERNET SWITCH SW108 Installation Manual

Segment Switching

The Model SW108 switch can segment a network into multiple connected pieces, increasing
overall bandwidth and throughput. Figure 3-2 illustrates the Model SW108 Ethernet switch
segmenting networks that are built with the NETGEAR Model EN104 and Model EN108
Ethernet hubs.
4
Link Rx
1 2 3 4
1
6
Key:
1 = Server with 10 Mbps connection
2 = Model SW108 Ethernet switch (Normal/Uplink push button set to Normal position)
3 =10 Mbps connection
4 = Model EN104 Ethernet hub (Normal/Uplink push button set to Uplink position)
5 = Model EN108 Ethernet hub (Normal/Uplink push button set to Uplink position)
6 = PCs with 10 Mbps connection
Figure 3-2. Model SW108 switch used as a segment switch
Applications
3
Installation Guide for the Model SW108 Ethernet Switch
1
2
Link
1 2 3 4 5 6 7 8
Rx
5
7629EA
3-3