Rj-45 Plug And Vista Rj-45 Connector; Table B-1. Rj-45 Plug And Vista Rj-45 Connector Pin Assignments - NETGEAR ETHERNET SWITCH SW108 Installation Manual

Installation Guide for the Model SW108 Ethernet Switch
Table B-1 lists the pin assignments for the RJ-45 plug and the vista RJ-45 connector.
Table B-1.

RJ-45 plug and vista RJ-45 connector

pin assignments
Pin Normal assignment
1 Input Receive Data +
2 Input Receive Data –
3 Output Transmit Data +
6 Output Transmit Data –
4, 5, 7, 8 Internal termination, not used for data transmission
* Applicable to port1 on the Model SW108 switch, when the Normal/Uplink push button is
in the Uplink position.
B-2
Uplink assignment*
Output Transmit Data +
Output Transmit Data –
Input Receive Data +
Input Receive Data –
Connector Pin Assignments