Mechanical Instructions - Philips 17S1AB Service Manual

10 17S1AB LCD
Preparation before disassemble
1. Clean the room for disassemble
2. Identify the area for monitor
3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow;
according to the actual condition plan the disassemble layout
4. Prepare the implement, equipments, and materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) Glove
6) Cleaning cloth
7) ESD protection
item picture
1
2
2
3
Operation
Disassemble the screws,
and then remove ASSY
CLMN
3
4
Turn over the monitor,
break BZL and RC apart.
And Turn over the
monitor again, remove
RC.
Remove the tape,
Disassemble the C/B wire
from PCBA, Disassemble
the LED board wire from
PCBA.
Tool Notes
Screw-driver glove
glove