Start-Up Guide - Sony bravia klv-40x450a Operating Instruction

Start-up Guide

1: Checking the accessories
AC power cord*
Antenna cable* (1)
Stand (1) and screws (4) (KLV-46X450A/40X450A
only)
Remote RM-GA014 (1)
Size AA batteries (R6 type) (2)
* Do not remove the ferrite cores.
To insert batteries into the remote
Push and lift the cover to open.
To replace the speaker grille
The speaker grille unit can be replaced with
others that are sold separately. However, do
not remove the unit except to replace it. For
details, see the instructions supplied with
speaker grille units.
4
GB
2: Attaching the stand (for
KLV-46X450A/40X450A)
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).