Sony bravia klv-40x450a Operating Instruction page 40

Light Sensor
Logo Illumination
Panel Key
Illumination
PC Power
Management
Language
Product Information
Factory Settings
Channel Set-up
1 Digit Direct
Favourite Set-up
Auto Tuning
Programme Sorting
40
GB
On Automatically optimises the picture settings according to the
ambient light in the room.
Off
Turns off the "Light Sensor".
~
• Do not put anything over the sensor, doing so may affect its function. See page 14
to check the position of the sensor.
Lights up and turns off the Sony logo on the front of the TV.
Constantly lights up the touch sensors on the front of the TV.
Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.
Sets the language displayed on the menu screens.
Displays product information of the TV.
Resets all settings to factory settings except for the "Programme Block" setting,
"Favourite Set-up" setting, and programme preset data. After completing this
process, the initial set-up screen is displayed. Completing auto tuning in initial set-
up will reset the settings that are not reset by "Factory Settings". To retain the
settings, skip the "Auto Tuning".
~
• Do not turn off the TV or press any buttons during "Factory Settings" (takes
about 30 seconds).
When "1 Digit Direct" is set to "On", you can select a channel using one preset
number button (0 – 9) on the remote.
~
• When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and
above by entering two digits on the remote.
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select "- -".
Tunes in all the available channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Changes the order of channels stored in the TV.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for the channel, then press
.