Download  Print this page

Advertisement

Safety
Information
Installation/Set-up
Install and use the TV set in accordance with the instructions below
in order to avoid any risk of fire, electrical shock or damage and/or
injuries.
Installation
s The TV set should be installed near an easily accessible AC
power outlet.
s Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the TV.
s Only qualified service personnel should carry out wall
installations.
s For safety reasons, it is strongly recommended that you use
Sony accessories, including:
KLV-55X450A/46X450A/40X450A:
Wall-mount bracket SU-WL500/WL50B
s Be sure to use the screws supplied with the Wall-mount bracket
when attaching the mounting hooks to the TV set. The supplied
screws are designed so that they are 8 mm to 12 mm in length when
measured from the attaching surface of the mounting hook.
The diameter and length of the screws differ depending on the
Wall-mount bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
8 mm - 12 mm
Screw (supplied with the Wall-mount
bracket)
Mounting Hook
Hook attachment on rear of TV set
Transporting
s Before transporting the TV
set, disconnect all cables.
s Two or three people are
needed to transport a large
TV set.
s When transporting the TV
set by hand, hold it as
shown on the right. Do not
put stress on the LCD
panel and the frame around
the screen.
s When lifting or moving the
TV set, hold it firmly from
the bottom.
s When transporting the TV
set, do not subject it to jolts
or excessive vibration.
s When transporting the TV
set for repairs or when
moving, pack it using the
original carton and
packing material.
For KLV-46X450A/40X450A
For KLV-55X450A
Be sure to hold the bottom of
the panel, and not the
transparent part, speaker, or
speaker grille area. Do not
compress the panel's
speaker grille area.
Ventilation
s Never cover the ventilation holes or insert anything in the
cabinet.
s Leave space around the TV set as shown below.
s It is strongly recommended that you use a Sony wall-mount
bracket in order to provide adequate air-circulation.
Installed on the wall
10 cm
Leave at least this space around the set.
Installed with stand
30 cm
10 cm
Leave at least this space around the set.
s To ensure proper ventilation and prevent the collection of dirt
or dust:
Do not lay the TV set flat, install upside down, backwards,
or sideways.
Do not place the TV set on a shelf, rug, bed or in a closet.
Do not cover the TV set with a cloth, such as curtains, or
items such as newspapers, etc.
Do not install the TV set as shown below.
Air circulation is blocked.
Wall
AC power cord
Handle the AC power cord and outlet as follows in order to avoid
any risk of fire, electrical shock or damage and/or injuries:
The shape of AC power plug, which is supplied with the TV set,
varies depending on the regions.
Use only Sony supplied AC power cords, not those of other
brands.
Insert the plug fully into the AC power outlet.
Operate the TV set on a 110–240 V AC supply only.
When wiring cables, be sure to unplug the AC power cord for
your safety and take care not to catch your feet on the cables.
Disconnect the AC power cord from the AC power outlet before
working on or moving the TV set.
Keep the AC power cord away from heat sources.
Unplug the AC power plug and clean it regularly. If the plug is
covered with dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
30 cm
10 cm
10 cm
6 cm
10 cm
Wall
(Continued)
9
GB

Advertisement

Chapters

Table of Contents

   Also See for Sony bravia klv-40x450a

   Related Manuals for Sony bravia klv-40x450a

This manual is also suitable for:

Bravia klv-46x450aBravia klv-55x450a

Comments to this Manuals

Symbols: 0
Latest comments: