Knife Drive Switch - Pfaff 918 Instruction Manual

Adjustment
12

Knife drive switch

.06.04
12 - 36
Requirement
When the adjustment lever 1 is set at "0", the knife drive unit must be switched off, and
from position "1" on it must be switched on.
2
3
Fig. 12 - 35
Set adjustment lever 1 at "0".
Turn lever 2 (screw 3) until it pushes switch 4.
Set adjustment lever 1 at "1".
Check the setting in accordance with the requirement, and adjust lever 2 if necessary.
4
1