Sewing - Pfaff 918 Instruction Manual

Sewing

10 Sewing
In the sewing mode all relevant settings for the sewing operation are displayed. Functions
can be switched on or off by pressing a key. Values for start and end backtacks or stitch
placement can be changed directly.
Functions in manual sewing, also see Chapter 7.09.02 Function keys:
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal..
10 - 1
(only on machines with Quick-flange motor)
When the machine is switched on, the sewing mode is always activated.
Switch on the machine.
3 3
A B
If necessary switch off the function "darning seam" or "counted seam", see Chapter 10.01
Darning program or Chapter 10.02 Counted seam.
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
The "Darning program" and "Counted seam" functions are explained in more
detail in Chapter 10.01 Darning program or Chapter 10.02 Counted seam.
3 3
C D
Presser foot raised at end of seam on/off
Thread trimming on/off
Darning program on/off
Counted seam on/off